• Round nose pliers
• Wire Cutters
• Flat nose pliers
• Chasing hammer
• Steel block
• 4 pieces of 2.7 inches (21 gauge 0.028 in 0.723 mm) Nickel Wire Dead Soft Square
(for shaping part)
• 1 piece of 30 inches (28 gauge 0.013 in 0.33 mm) Filofly, 999 Fine Silver Wire,Dead soft,Round (for wrapping part)
• 2 pieces of 2 inches (20 gauge 0.032 in 0.81 mm) Filofly, 999 Fine Silver Wire, Dead Soft, Round (for hook part)
• 2 pieces of ¼ inches (20 gauge 0.032 in 0.81 mm) Filofly, 999 Fine Silver Wire, Dead Soft, Round (for jump Rings)
• 4 pieces of 3 inches (21 gauge 0.028 in 0.723 mm) Nickel Wire Dead Soft Square
(for hook clasps part)
• 2 pieces of Green heart bead (preferably 4 mm) (for heart bead part)
STEP 1
Cut 4 pieces of 2.7 inches (7 cm) 21 gauge nickel wire
STEP 2
Twist the wire into a spiral using Flat nose pliers and Round nose pliers
STEP 3
Loop both end of each wire using Round nose pliers
STEP 4
Curve the wires
STEP 1
Measure 30 inches of 28 gauge 999 Fine Silver wire
*Recommend using Fine silver or Sterling silver Dead Soft Wire for this wrapping
STEP 2
Wrap around 2 nickel wires together using 28 gauge 999 Fine Silver wire
STEP 3
Wrap the top part of nickel wire 3 times then bottom part 2 times then repeat
STEP 4
Cut the end part using Wire Cutters and secure it in place using Flat nose pliers
STEP 1
Use leftover 3.94 inches (10 cm) of 28 gauge 999 Fine Silver wire from wrapping part, Loop one end using Round nose pliers
STEP 2
Insert the heart bead through the wire
STEP 3
From the top of the heart about ¼ inches, create loop using Round nose pliers
STEP 4
Wrap the rest of the wire 8 times down along the ¼ inches part, then cut the rest of the wire
STEP 1.
Mark the point of 3 inches 21 gauge nickel square wire
STEP 2.
Bend loop one end of the wire using Round nose pliers, Repeat on the other side
STEP 3.
Cut the rest end of the wire
STEP 1.
(2pcs) Use leftover of 20 gauge 999 Fine Silver wire 2 inches, curve it in the middle
STEP 2.
Loop one end of the wire using Round nose pliers, Repeat on another piece
STEP 3.
Hammer the wire
STEP 4
Create 2 round jump rings 4 mm diameter using leftover of 20 gauge 999 Fine Silver wire
STEP 5.
Insert all the parts on the hook then secure them using Round nose pliers
You can but all the products using in this tutorial by clicking add to cart here
Material : Nickel CDA #752 alloy (65% copper, 17% zinc, 18% nickel)
Hardness : Dead Soft
Shape : Square
Size : 21 Gauge
Length : 5 Feet
Product Dimensions : 0.028″ (0.72mm)
Product Weight : 0.29 oz
Material : 999 Fine Silver
Hardness : Dead Soft
Shape : Round
Size : 28 Gauge
Length : 5 Feet
Product Dimensions : 0.33×0.33×1524 (mm) / 0.013×0.013×60 (inches)
Product Weight : 1.24 (grams) / 0.04 (oz)
Material : 999 Fine Silver
Hardness : Dead Soft
Shape : Round
Size : 20 Gauge
Length : 5 Feet
Product Dimensions : 0.81×0.81×1524 (mm) / 0.032×0.032×60 (inches)
Product Weight : 8.39 (grams) / 0.30 (oz)
Includes : 1pc Round Nose Pliers
Dimensions : 5″ x 3″ x 0.38″, Round Nose Ø 1 – 5mm
Material : Carbon Steel (Durable and Strong)
Spring Loaded : Self-Opening for easier and safer use
$7.99
Material : High Carbon Steel (Durable and Strong)
Includes : 1pc * Side Cutting Pliers
Dimensions : 4.75″ x 3.38″ x 0.5″
Spring Loaded : Self-Opening for easier and safer use
$8.99
Material :Carbon Steel (Durable and Strong)
Includes :
1pc * Pouch : 6.25″ x 4.50″ x 1.50″ : Made with faux leather material, Easy to carry, Sturdy storage zipper with elastic for organization.
1pc * Round Nose Pliers : 5.12″ x 2.56″ x 0.50″ (Ø 1 – 5mm)
1pc * Side Cutting Pliers : 5″x 2.25″ x 0.50″
1pc * Needle Nose Pliers : 5.12″ x 2.25″ x 0.50″
1pc * Linesman Pliers: 5″ x 2.25″ x 0.50″
Double Leaf Spring : Self-Opening for easier and safer use
$19.99
