Step 1. 

Start from the middle of 30 Inches 24 Gauge Copper wire

Step 2. 

Wrap it around the end of the loop of 20 Gauge copper wire 6 Inches 8 times  

Step 3. 

Attach the heart part and the loop wire part together by wrapping the wire around them 2 times

Step 4. 

Wrap 24 Gauge wire only on the loop wire 2 times then wrap both wires 2 times then repeat this step

Step 5. 

Once loop wires meet at the bottom of the heart cut the rest of the 24 Gauge wire, Bend 20 gauge wires into straight line using Flat nose pliers

Step 6. 

Use 24 Gauge Gold Filled wire to wrap around those straight lines,2 times on one side then 2 times together then repeat, stop once it is about 3/4 inch left from end of the wire

Step 7. 

Cut the rest of the wire, bend one side of the wire then loop at the end

Step 8. 

Loop another end, cut the rest of the wire