Free Tutorial : Silver Wires & Black Stone Bracelet Pendant

This is a PDF with a video tutorial about making simply fine silver wire & black stone wrapped pendant, please feel free to try it yourself…. Let’s get started!!

Materials and Tools

• 1 piece of 23 inches

(30 Gauge 0.010in 0.26mm) Filofly, 999 Fine Silver Wire, Dead Soft, Round

• 4 pieces of 14 inches

(20 Gauge 0.032in 0.81mm) Filofly, 925 Sterling Silver Wire, Dead Soft, Round

• 1 piece Black Stone ( preferably 6 mm)

• Flat nose pliers

• Cutting pliers

• Round nose pliers

Wrapping Part

Step 1. Wrap 23 inches (30 Gauge 0.010in 0.26mm) Filofly, 999 Fine Silver Wire, Dead Soft, Round around one of 14 inches (20 Gauge 0.032in 0.81mm) Filofly, 925 Sterling Silver Wire, Dead Soft, Round 5-6 times

Step 2. Add another 3 pieces of 14 inches (20 Gauge 0.032in 0.81mm) Filofly, 925 Sterling Silver Wire, Dead Soft, Round on the top then wrap the 30 Gauge fine silver wire around them 2 times. Repeat this step about 30-35 times

Step 3. Bend 20 Gauge Sterling Silver Wire on the top to 90 degree then add the stone

Step 4. Keep repeat step 2 without the wire with the stone until the length is longer than the stone

Step 5. Start to wrap 30 Gauge fine silver wire around the top wire again once the wrapping part past the stone

Step 6. Follow step 2 again the wrapping part on both side have the same length

Bending Part

Step 1. Bend the wires as shown on the picture/video

Step 2. Wrap left wire around right wire as shown on the picture/video

Step 3. Adjust and cut the wires as shown on the picture/video using Cutting pliers and Round nose pliers

Step 4. Bend the other side of the wire to the back then separate the unwrapping part in pair

Step 5. Use leftover 30 Gauge Fine Silver wire to wrap around the 20 gauge outermost wire 10-15 times then wrap around the inner wire 1 time. Repeat about 8-9 times

Step 6. Bend the wire up and wrap around the hook part

Step 7. Follow step 5 on the other side then bend it up and wrap around the other side of the wire,
Then cut the rest of the wire

Step 8. Cut the leftover wire using Cutting pliers and secure the wire in place using Flat nose pliers